Skip to main content
SimilarExport ZIP
100%

00-02-26-073-05W5-0.json well log converted from 00-02-26-073-05W5-0.las using wellio.js

✓ Published0🌍 Public
JJustinGOSSES
Last edited May 11, 2018
Created on May 11, 2018

This example visualizes a well log from the LAS file 00-02-26-073-05W5-0.las, converted to JSON using wellio.js. It displays depth-based curves for density porosity, neutron porosity, gamma ray, caliper, and deep resistivity, with depth on the vertical axis. The visualization uses the JSON structure to render each curve as a distinct line plot, showing how these subsurface measurements change over the logged interval from 350 to 590 meters. The data comes from the well "TRICENT ET AL MITSUE 02-26," recorded by Schlumberger in 1982, and the plot leverages the curve information block to map each measurement to its graphical representation.

AI-generated description

Similar vizzes

Loading thumbnail…

Gist a9239feb46c9a77aa7e57b052568f0a2

This example visualizes well-log data from the CWLS LAS 2.0 format, showing depth-series curves for gamma ray, density porosity, neutron porosity, caliper, and deep resistivity across a 0.25-meter increment from 390 to 650 meters. The code parses the JSON structure containing version, well information, curve metadata, and parameter blocks, then renders the measurements as a multi-track line chart. It uses D3.js for SVG-based plotting, with scales mapping depth to the y-axis and each measurement type to its own x-axis, while reading curve mnemonics and data arrays directly from the JSON object.

JJustinGOSSES
86% match
Loading thumbnail…

Gist cc6d3e2dfc8356dd8bb96b58c8c8ac7e

This example visualizes well-log data from a LAS file, displaying depth-based curves for porosity, gamma ray, caliper, and resistivity. The code uses D3.js to parse the JSON-structured LAS data, mapping each curve to a separate track with depth on the y-axis. It employs D3 scales and axes to render the line charts, with the well name and location shown as a title. The visualization highlights the raw curve values and their relative changes across the logged depth interval.

JJustinGOSSES
86% match
Loading thumbnail…

Gist c643e25774aea39556799cc517654d46

This example visualizes well log data from a Chevron oil well, showing depth-based curves for gamma ray, density porosity, neutron porosity, caliper, and deep resistivity. The code parses a JSON file containing LAS 2.0 format data and renders the measurements as multiple line charts using the Observable Plot library. The visualization displays the raw curve values against depth, with the top depth at 390 and bottom at 650 meters, sampled at 0.25-meter increments.

JJustinGOSSES
85% match
Loading thumbnail…

A test LAS file of well log

This visualization displays a subset of well log data from a LAS file, plotting depth on the vertical axis against several measured curves, including gamma ray, caliper, neutron porosity, density porosity, and deep resistivity. The example uses the Python `lasio` library to parse the LAS file and Bokeh to render the curves as horizontally-oriented line plots. The depth series spans from 200 to roughly 375 meters at a 0.25-meter sampling interval, with a null value of -999.25 used for missing data. The plot shows the raw, unsmoothed measurements as they appear in the source file from JustinGosses' gist.

JJustinGOSSES
82% match
Loading thumbnail…

location data and top pick data of Mannville oil and gas wells in the open-dataset here: http://ags.aer.ca/publications/SPE_006.html

This map shows the locations and depth picks of Mannville oil and gas wells in Alberta, using a rasterized scatter plot rendered with d3.js and the `d3.geoPath` for projecting geographical coordinates. Each point is colored by its pick depth (from the “Pick” column) and sized or opacity-mapped by quality, revealing spatial depth trends across the formation. The code loads CSV data from the AGS public dataset, converts latitude/longitude to projected coordinates, and draws points onto a Canvas via `getImageData`, with a legend and color scale built using `d3.range`.

JJustinGOSSES
59% match
Loading thumbnail…

Hello VizHub

This interactive visualization displays monthly water level measurements for two wells (OW2DWL and OW2DSWL) over time. The chart uses a dual-panel layout with a detailed focus plot above and a brushable context view below for zooming and panning through the time series. The visualization is built with D3 v5 and renders as SVG, using `d3.brushX` for interactive selection and `d3.nest` to group data by well. The data is loaded from a remote CSV via `d3.csv`, with D3's `scaleTime` and `scaleLinear` handling the date and value axes.

SShane Carey
58% match
Loading thumbnail…

Fork of Brush, Trendline, Legend, Linechart, Barchart

The visualization shows groundwater monitoring data from two observation wells at the Bog of the Ring, plotting water levels over time as a line chart with a brushed time-range selector below. A dashed linear regression trendline appears for the selected period, calculated via the least-squares method in the `Regression.js` module. The implementation uses D3 v5 APIs including `d3.brushX`, `d3.scaleTime`, `d3.scaleLinear`, `d3.nest`, and `d3.line`, rendering to SVG with a categorical color scale to distinguish the two wells. Data is loaded from external CSV files.

AAndre J Denais
56% match
Loading thumbnail…

Gist e6fd5e60c1a06a14607e7c8cecae680f

This example maps the geographic distribution of oil and gas activity in British Columbia, showing well locations and facility sites as points over a basemap of the province. The visualization uses R’s `httr` library with `GET()` and `set_cookies()` to fetch a CSV dataset from the BC Oil and Gas Commission’s reporting portal, then renders the spatial data as a static plot. While the code does not specify a particular plotting package, the structure suggests base R graphics or a simple map layer, with coordinates derived directly from the parsed CSV content. It emphasizes raw data retrieval and immediate plotting without interactive elements.

MMbrownshoes
56% match